Sawn Timber

 Productgroup Description
 
PACKAGING MATERIAL
Whitewood or redwood for production of pallets, boxes, cases etc. The quality is normally sixths.

Whitewood - Typical dim.
16 x 075/ 100/ 125 mm
19 x 100/ 125/ 150 mm
22 x 075/ 100/ 125 mm
25 x 075/ 100/ 125/ 150 mm
50 x 100 mm
75 x 075/ 100/ 125/ 150/ 200 mm

Relevant sawmills:
All sawmills with whitewood

Redwood - Typical dim.
16 x 075/ 100/ 125 mm
19 x 100/ 125 mm
25 x 075/ 100/ 125/ 150 mm
75 x 075/ 100/ 125/ 150/ 200 mm

Relevant sawmills:
All sawmills with redwood

 
Exterior cladding
Our raw material for exterior cladding is specially selected from a 2X-log sawn product. The material is slow grown with tight grain, sorted as US-V. This product normally comes in whitewood but can also be offered in redwood.

Typical dimensions
42 x 100/ 150 mm
44 x 100/ 125/ 150/ 175 mm
50 x 125/ 150/ 175/ 200 mm
63 x 125/ 150/ 175/ 200 mm

Relevant sawmills:
Mjøsbruket, Numedal, Soknabruket, Telemarksbruket, Våler, Notnäs, Nössemark Trä, Ransbysågen, Valåsen and Årjäng Såg

 
FURNITURE PRODUCTS
Specially dried timber. These products are produced ex a top or a middle pine log, with only fresh knots accepted.The moisture content is normally 8% +/-2%. The product is well suited for edge glued furniture panels and other products meant for visual exposure.

Typical dimensions
32 x 125 mm
38 x 100/ 125 mm
50 x 100/ 115/ 125 mm

Relevant sawmills:
Løten and Dalaträ

 
GLUELAM LAMELLAS 
We produce glulam lamellas for the quality conscious and demanding Scandinavian glulam industry, and we also export to Germany, France and Japan. The lamellas are Dynagrade machine stress rated to the classes LS 15 and LS 22, and are in addition sorted visually to ensure the aesthetic quality. At customers request we can offer lamellas with knot-free ends, therby facilitating the fingerjointing in the glulam factory. Moisture content is normally 12% +/- 2%. Our log harvesting area allows us to offer a very good product for the gluelam industry, and with an average lenght of more than 4.5 meters. ** (See Notes below)

Typical dimensions
50 x 100/ 125/ 150/ 175/ 200 mm

Relevant sawmills:
Mjøsbruket, Numedal, Våler, Notnäs and Årjäng Såg,

 
WINDOW MATERIAL
To secure a long life for a window, the raw material must be carefully selected. We sort the logs on species, grain /width of year rings, extent of heartwood, and general quality before sawing. The inner pieces can be sorted separately for their heartwood share, while outer pieces can be for fingerjointing. The customer based quality sorting is then done before drying, enabling us to differ the M.C. according to customers requirements. The species for these products is normally redwood .

Typical dimensions
50 x 088/ 100 mm
63 x 063/ 075/ 085/ 105/ 125 mm
75 x 075/ 085/ 100 mm

Relevant sawmills:
Dalaträ, Valåsen, Løten and Årjäng Såg

 
MOULDINGS
The best redwood sideboards for Mouldings. 3-sides free of knots.

Typical dimensions
16 x 075/ 100 mm
19 x 075/ 100/ 125/ 150 mm
25 x 075/ 100/ 125/ 150/ 200 mm
32 x 100/ 125/ 150 mm
38 x 100/ 125/ 150 mm

Relevant sawmills:
Dalaträ, Vaølåsen, Norsälven, Notnäs, Årjäng Såg and Løten

 
INTERIOR PANEL PRODUCTS
The material is slow grown with tight grain, sorted as US-V. This product normally comes in whitewood but can also be offered in redwood.

Whitewood - Typical dim.
32 x 125 mm
38 x 100/ 125 mm
44 x 100/ 125 mm
50 x 100/ 125/ 150/ 175 mm

Relevant sawmills:
Numedal, Våler and Ransbysågen

Redwood - Typical dim.
32 x 125 mm
38 x 100/ 125 mm
44 x 125 mm
50 x 100/ 125/ 125/ 175/ 200 mm

Relevant sawmills:
Løten, Våler, Soknabruket, Telemarksbruket, Dalaträ, Notnäs, Ransbysågen and Norsälven

 
CONSTRUCTION/ CARCASSING
Moelven Timber produce large volumes of timber for constructional purposes,often stress rated according to to specified strenght classes/standards, f.i. the European standard EN 14081 * (See Notes below)..

Typical dimensions
38 x 100/ 150/ 200 mm
47 x 100/ 125/ 150/ 175/ 200/ 225 mm
50 x 100/ 125/ 150/ 200 mm

Relevant sawmills:
Mjøsbruket, Numedal, Våler, Nössemark Trä, Notnäs, Valåsen, Årjäng Såg and Løten

 
JOINERY
These products are for interior purposes such as stairs, doors, windows etc. The edges are practically knotless, while the face and the back may contain knots, also some smaller black knots. We can also offer speciality joinery products such as free of heart center (FOHC), green-split, or cut to size/ purpose.

Typical dimensions
38 x 125/ 150/ 175/ 200 mm
50 x 125/ 150/ 175/ 200 mm
63 x 125/ 150/ 175/ 200 mm
75 x 150/ 175/ 200 mm

Relevant sawmills:
Mjøsbruket, Løten, Våler, Dalaträ, Notnäs, Norsälven and Årjäng Såg

 
HEARTWOOD
Raw material to planing mills producing a.o. exterior cladding, exterior wooden roofing and decking material. Heartwood is the inner part of the trunk in an aging tree. The heartwood is naturally impregnated by extracted substances from the tree itself, clogging the wood cells and thereby counteract fungi and rot decay.

Typical dimensions
38 x 150/ 200 mm
42 x 150 mm
43 x 150/ 200 mm
44 x 150 mm
50 x 150/ 200/ 225 mm
63 x 150/ 200 mm

Relevant sawmills:
Løten, Soknabruket, Telemarksbruket and Dalaträ

Other products/ dimensions on request!   

Notes:
* In many of the mills we machine stress rate to the required strenght class with Dynagrade machines. All our construction timber is CE-marked. Our production of construction timber is third party controlled and certified by SP Technical Research Institute of Sweden or the Norwegian Institute of Wood Technology.
**We can also supply most of the different structural/ strength classes according to the European Standard EN 388, for instance C 18, C 24, C 30, LT 20, LT 30 etc.

All sawmills are both PEFC and FSC certified - Certificates menu (also KD, CE and ISO cert.)

UK market
Pehr Eriksson
Key Account Manager - United Kingdom
Moelven UK Ltd - Moelven Timber
+44 (0)7841 492330
pehr.eriksson@moelven.com
Other markets
Espen Magnussen - Global
Moelven Timber
+46 10 122 66 81
espen.magnussen@moelven.com
China market
Anthony Noble
Sales
Moelven Valåsen AB
+46 10 122 5445
anthony.noble@moelven.se